Dressers with mirrors– Many individuals prefer to have a mirror above their company to make use of as a dressing assist, to indicate how outfits look or repair hair and make-up. The mirror is often positioned both adjoining one finish of the company or centered above the company. A few of location depends upon the place the wall studs are positioned. Mirrors could be heavy and wish this further assist to make sure that they don’t fall.
Directions
Flip stud finder and slide it over the wall to find the studs. The machine will beep when a stud is discovered. Mark the stud places with a pencil. Decide how excessive the dressers with mirrors. Select a hanger for the mirror if it has one. Most mirrors include hangers already related.
Look the place you need the hanger must be in the back of the mirror and drill a small pilot gap within the body. Measure the again of the mirror to find out the gap from the underside of the mirror to the wire hanger or different machine. In the event you use wire, has a helper stretch the wire as it might if the mirror was hanging out with two screws so that you just get an correct measurement.
Measure from the mark on the wall above the dressers with mirrors to the gap you decided. That is the place you’ll put the screws. Drill screw within the wall anchor. Place the second screw on the mark for the second stud. Set screw if essential to equalize them. Drill second screw within the stud. Cling the mirror on the screws.